Business District Sidewalk Bid Specification Location – West Side of 511 Oak Street

•Remove approximately 68’ segment of existing concrete steps and sidewalk and properly dispose of all construction waste material.

•Prepare subgrade by tamping or rolling until thoroughly compacted and at the proper line and grade.

•Securely place forms for new concrete sidewalk 68’ x 9’ x 5’’ thick, 2 steps 68’ long with 7” riser and 12” run, and 4’ wide ADA compliant ramp.

•Furnish and install #4 rebar in steps and wire mesh in sidewalk and ramp.

•Install approximately 9’ x 68’ x 5” IDOT Class SI concrete sidewalk. Concrete shall have a minimum thickness of 5” or match existing if greater. Joint spacing shall match existing

•Install 4’ wide IDOT Class SI concrete ADA ramp and handrail. The ramp will be two sided, approximately 6’ long on each side of 5’ landing at building entrance.

•Install 68’ of IDOT Class SI concrete steps.

•Remove approximately 8’ x 68’ of brick and concrete road in front of new steps and replace with 6” thick IDOT Class PP concrete pavement.

•Bid needs to allow for gravel fill under sidewalk.

All concrete must be 4,000 psi mix, broom finished and seals with cure and seal. Material testing shall be provided by the Contractor. The work shall be in accordance with Standard Specifications for Road and Bridge Work in Illinois, Current Edition.

Please call City Hall and ask for Bill Moline 309-432-2558 or visit site for visual on what is needed.